2n M2M Solution 2N SmartCom - User Manual 1.9.0 Uživatelský manuál stáhnout pdf (Strana 36)

362N TELEKOMUNIKACE a.s., www.2n.cz

Enter the command to set the baud rate to 115,200 bps.

at^scport2="baudrate",230400

Enter the command to set the baud rate to 230,400 bps.

The baud rate can be set to 110 – 230,400 in standard steps.

at^scport2="data_bits",8

Enter the command to set the data bits to 8. Setting options: 5-8.

at^scport2="stop_bits",2

Enter the command to set the stop bits to 2. Setting options: 1-2.

at^scport2="parity",2

Enter the command to set the parity check type. Setting options: 0-4.

at^scport2="save"

Enter the command to save the changes.

at^scport2="restart"

Enter the command to restart the port.

at^scport2="srestart"

Enter the command to save the changes and restart the interface.

at^scport2?

Enter the command to display the currently set port values.

^SCPORT2: "BAUDRATE",9600

^SCPORT2: "DATA_BITS",8

^SCPORT2: "STOP_BITS",1

^SCPORT2: "PARITY",0

at^scport2=?

Enter the command to display the port setting options.

Relay Outputs

These commands are used for relay output control.

at^screl1?

Enter the command to identify the status of relay 1.

at^screl1=0

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 148 149

Žádné komentáře

2n M2M Solution 2N SmartCom - User Manual 1.9.0 Uživatelský manuál Strana 36